Chillifire configuration for routers running DD-WRT

Known Limitations: The configuration file that is available for download has been tested on a Linksys WRT54GL, Asus WL-520gU, and Netgear WNR3500L only. Other routers may not work with this configuration as their inherent network configuration may be different. We have therefore detailed the required configuration below, if you want to manually configure your router to run a Chillifire hotspot.

Firmware Installation Guide:
Installation Tutorial for routers running DD-WRT

Required Configuration:
Chillifire configuration for DD-WRT running on Linksys WRT54GL, WRT54GS, WRT54G(pre v4), and Asus WL-520gU routers
Chillifire configuration for DD-WRT running on Netgear WNR3500L routers
Chillifire configuration for DD-WRT running on D-Link Dir615 C1/C2 routers

The installation guide assumes the standard version of DD-WRT (either v24 SP1 or v24 pre-Sp2 Build 13064) is already installed on your router.

Don't forget to register the router after installation as per the Installation Guide. Otherwise we do not know it is yours.


Manual Installation:
In case you have a router other than the Linksys WRT54GL, WRT54G, WRT54GS, Netgear WNR3500L or Asus WL-520gU you can use the following guide for a manual installation:

Manual Installation Tutorial for routers running DD-WRT
Note: Please do not cut and paste the UAM Allowed string from the manual, as it appears to carry over some invalid new-line characters. Follow the instructions within the guide to avoide the issue. Thank You.

Have more questions? Submit a request


Please sign in to leave a comment.
Powered by Zendesk